Tags

, , , ,

I’ve decided to try to post a few blocks as quickly as I can so you can get a feel for whether you’d like jump in and join me. Block 1 is a horizontal block. Block 2 is vertical, so bear this in mind when making your fabric choices. Part of block 1 will be in contact with block 2.

So for this block you’ll need a piece of background fabric 12.5″ X 8.5″ and three pieces slightly larger than 3″ square (you’ll see what I mean later) and a further three pieces slightly larger than 1.5″ square. You’ll also need some batting, some background fabric, some freezer paper and 12wt thread. With regards to the backing – the back will be very “patchworky” so I’d use a variety of fabrics.

image

Cut a piece of fabric slightly larger than 3″ square and a piece of freezer paper 3″ square. Place the freezer paper on the wrong side of the fabric shiny side up. (This is contrary to most techniques but there is method in my madness. All will be revealed.)

image

Fold one seam allowance over onto the freezer paper and carefully iron it. Make sure not to let the iron touch the bare freezer paper.

image

The fabric sticks to the freezer paper and stays in place. Do the same with all the other seam allowances.

image

Do the same to the other two squares of fabric. Take the background fabric fold it in half so it measures 6.25 X 8.5″ and lightly press the crease. Then open it out and fold one edge into the centre create and lightly press the new crease.

imageimage

Repeat the last step with the other end of the fabric, then open it out, fold in half the other way and lightly press the crease. Your fabric should then look like the piece below.

image

Take one of your 3″ squares and centre on the background fabric, using the creases as guides as to where the corners should be.

image

Use the hot iron to press the square to the background. This will lightly attach the freezer paper to the backround. Gently turn it over and set the freezer paper more securely by pressing the back of the fabric. Do the same with the other two squares, using the other creases to centre the squares. The outer squares should overlap the centre one, as shown

image

Applique the outer squares first and then the centre one. Then flip the block over and cut out the black fabric inside the stitching and gently pull out the freezer paper as shown below.

imageimageimageimageimage

Next cut out three 1.5″ squares of freezer paper and repeat the earlier process on your smaller squares of fabric and press them onto the middle of the larger squares.

imageimage

Applique them and then cut the back away and remove the freezer paper.

image

Then sandwich the block as per block 1 and draw a line 1/4″ outside the large squares and quilt with 12 wt thread. Draw a second line and quilt it and then you’re done with block two.

imageimage

Advertisements